| General | ||||||||
|---|---|---|---|---|---|---|---|---|
| Frequency coverage (MHz) |
|
|||||||
| Number of channels |
|
|||||||
| Type of Emission Analog: Digital (IDAS): |
11K0F3E 4K0F1D, 4F0F1E |
|||||||
| Power supply requirement | 7.5V DC nominal | |||||||
| Current drain TX High RX Max. auidio/ Sandby |
|
|||||||
| Antenna impedance | 50Ω | |||||||
| Operating temperature range | –30°C to +60°C; –22°F to +140°F (Radio specification) | |||||||
| Dimensions (W×H×D) (Projections not included) |
F1100DS/D, F2100DS/D: 52.2 × 111.8 × 29.4 mm; 2.1 × 4.4 × 1.2 in (With BP-280) F1100DT, F2100DT: 52.2 × 111.8 × 34.1 mm; 2.1 × 4.4 × 1.3 in (With BP-280) |
|||||||
| Weight (With BP-280 & MB-133) | F1100D, F2100D: 260 g; 9.2 oz F1100DS, F2100DS: 270 g; 9.5 oz F1100DT, F2100DT: 280 g; 9.9 oz |
|||||||
| Transmitter | ||||||||
| Output power (Hi, L2, L1) |
|
|||||||
| Max. frequency deviation | ± 5.0 kHz (25 kHz), ±4.0 kHz (20 kHz), ±2.5 kHz (12.5 kHz) | |||||||
| Spurious emissions | 70dB minimum | |||||||
| Frequency stability | ±1.0ppm | |||||||
| Audio harmonic distortion | 0.7% typ. (25 kHz), 0.9% typical (20 kHz) 1.0% typical (12.5 kHz) (at AF 1 kHz 40% deviation) |
|||||||
| FM Hum and Noise (without CCITT filter) |
|
|||||||
| Residual modulations (with CCITT filter) |
|
|||||||
| FSK error | 5.0% max. | |||||||
| Ext. microphone connector | 3-conductor 2.5 (d) mm (1⁄10")⁄2.2kΩ | |||||||
| Receiver | ||||||||
| Sensitivity (at 12dB SINAD) (at 20 dB SINAD) (at 5% BER) |
|
|||||||
| Adjacent channel selectivity |
|
|||||||
| Spurious response | 80dB typical | |||||||
| Intermodulation rejection |
|
|||||||
| Hum and noise (With CCITT filter) (Without CCITT filter) |
|
|||||||
| AF output power (at 5% distortion) Internal SP External SP |
1500 mW typical (With an 8 Ω load) 800 mW typical (With an 8 Ω load) |
|||||||
| Ext. speaker connector | 2-conductor 3.5 (d) mm (1⁄8″)/8Ω | |||||||